TATAISO E FETILENG EA MACHINE OA PE PIPE: KHETHO, TSAMAISO, LE LITSEBETSI.

Tlhaloso e Khutšoanyane:

Liphaephe tsa polyethylene (PE) li sebelisoa haholo lits'ebetsong tse fapaneng, ho kenyelletsa phepelo ea metsi le khase, lits'ebetso tsa likhoerekhoere le nosetso, ka lebaka la ho fetoha ha tsona, ho tšoarella le ho hanyetsa ho bola. Ho chesetsoa ha lipeipi tsa PE ke ts'ebetso ea bohlokoa e netefatsang bots'epehi le ts'epahalo ea marang-rang a lipeipi. Tataiso ena e fana ka leseli le felletseng mabapi le mechini ea ho tjheseletsa lipeipi tsa PE, e u thusa ho khetha le ho e sebelisa ka nepo bakeng sa liphetho tse nepahetseng.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela ho Mechini ea ho Welding ea PE Pipe

Mechini ea ho tjheseletsa lipeipi tsa PE, e tsejoang hape e le mechini ea butt fusion, e etselitsoe ho kopanya liphaephe le lisebelisoa tsa PE ho theha sistimi e tsoelang pele, e thibelang ho lutla. Ts'ebetso ea tjheseletsa e kenyelletsa ho futhumatsa phala e qetellang mocheso o itseng pele o li hatella hammoho ho theha maqhama a matla, a homogeneous. Mokhoa ona o ratoa ka lebaka la ho tšepahala ha oona le boleng bo phahameng ba li-welds tseo o li hlahisang.

Mefuta ea Mechini ea Welding ea PE Pipe

Mechini ea ho Welding ea Pipe ea Manual: E hloka hore opareitara a laole potoloho ea ho futhumatsa le ho pholisa. E loketse merero e menyenyane kapa moo ho nepahetseng le ho laola ho leng bohlokoa.
Semi-Automatic PE Pipe Welding Machines: Iketsetse likarolo tse itseng tsa ts'ebetso ea welding, joalo ka ho beha nako ea ho futhumatsa le ho pholisa, ho netefatsa botsitso le ho fokotsa phoso ea opareitara.
Mechini ea ho Welding ea Pipe ea PE e Iketselitseng ka Botlalo: Fana ka boiketsetso bo felletseng ba ts'ebetso ea welding, ho kenyelletsa khatello, ho futhumatsa le lipotoloho tse futhumatsang, tse loketseng merero e meholo le ho netefatsa li-welds tsa boleng bo holimo tse nang le ts'ebetso e fokolang ea matsoho.

 

 

Ho Khetha Mochini oa Welding oa PE o Nepahetseng

Ho khetha mochini o loketseng oa ho tjheseletsa phala ea PE ho ipapisitse le lintlha tse 'maloa:
Boholo ba Pipe: Botenya le botenya ba lebota la liphaephe tseo u ikemiselitseng ho li tjheseletsa li tla lekanyetsa boholo le mofuta oa mochini oa tjheseletsa o hlokahalang.
Sekala sa Morero: Nahana ka boholo ba morero oa hau. Mechini e entsoeng ka letsoho e ka ba le litšenyehelo tse ngata bakeng sa mesebetsi e menyenyane, e etsahalang ka linako tse ling, athe mechini e ikemetseng kapa ea othomathike ka botlalo e loketse mesebetsi e meholo, e etsahalang khafetsa.
Boemo ba Tsebo ea Opereishene: Mechini e ikemetseng ka ho feletseng e fokotsa tlhokahalo ea basebetsi ba nang le tsebo e phahameng, kaha ba laola boholo ba li-parameter tsa ts'ebetso ea welding ka tsela e iketsang.
Tekanyetso: Le hoja mechine ea othomathike e fana ka botsitso le katleho e kholoanyane, e boetse e tla le litšenyehelo tse phahameng tsa pele. Leka-lekanya tekanyetso ea hau le litlhoko tsa morero oa hau le melemo ea nako e telele ea katleho.

 

Malebela a Ts'ebetso Bakeng sa Mechini ea Welding ea PE Pipe

● Tokisetso e Nepahetseng: Netefatsa hore liphaephe li sehiloe ka ho lekana le ho hloekisoa hantle pele li tjheseletsa.
● Mocheso o Molemo ka ho Fetisisa: Khomarela litlhophiso tsa mocheso tse khothalletsoang bakeng sa mofuta o khethehileng oa pipe ea PE e cheselitsoeng ho qoba manonyeletso a fokolang.
● Khatello e Nepahetseng: Sebelisa khatello e nepahetseng nakong ea ts'ebetso ea welding ho ea ka litlhaloso tsa mochine le bophara ba pipe.
● Nako ea ho Pholisa: Lumella nako e lekaneng ea ho pholisa tlas'a khatello ho netefatsa ho thehoa ha tlamo e matla.

Lisebelisoa tsa Mechini ea ho Welding ea PE Pipe

Mechini ea welding ea PE e bohlokoa bakeng sa lits'ebetso tse fapaneng, ho kenyelletsa:
● Mekhoa ea Phepelo ea Metsi: Bakeng sa ho theha lipeipi tsa metsi tse tšoarellang tse hananang le khatello ea tikoloho le ho bola ha lik'hemik'hale.
● Mecha ea Phano ea Khase: Ho etsa bonnete ba hore liphaephe tsa khase tse sa duleng tse nang le khanyetso e phahameng ho phatlalatseng mapetsong.
● Tsamaiso ea likhoerekhoere le ea ho ntša metsi: Bakeng sa ho aha likhoele tsa likhoerekhoere tse matla le tse sa duleng.
 Mekhoa ea ho nosetsa: Temong, ho aha marangrang a nosetso a sebetsang hantle le a tšoarellang.

Qetello

Mechini ea ho tjheseletsa lipeipi tsa PE ke lisebelisoa tsa bohlokoa ho aheng le ho lokisoeng ha lipeipi tse tšepahalang. Ka ho utloisisa mefuta ea mechini e fumanehang, ho khetha mochini o nepahetseng bakeng sa litlhoko tsa hau, le ho latela mekhoa e metle ea ts'ebetso, o ka netefatsa bots'epehi le bophelo bo bolelele ba lits'ebetso tsa lipeipi tsa hau tsa PE. Ha tlhoko ea liphaephe tse tšoarellang le tse sebetsang hantle e ntse e hola, karolo ea mechini ea ho tjheseletsa lipeipi tsa PE ho netefatsa hore li-welds tsa boleng bo holimo li ba bohlokoa le ho feta.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona