Buug-hawleedka TPWC315 BAND SAW
Sharaxaada Gaarka ah
Ka hor inta aan la hawlgelin mishiinka, qof kastaa waa inuu si taxadar leh u akhriyaa sharaxaaddan oo uu si fiican u ilaaliyo si loo hubiyo badbaadada qalabka iyo hawlwadeenka, iyo sidoo kale badbaadada kuwa kale.
2.1 Mashiinkan waxaa loo isticmaalaa in lagu gooyo tuubooyinka laga sameeyay PE, PP iyo PVDF loomana isticmaali karo in lagu gooyo waxyaabaha aan qeexin; Haddii kale waxaa laga yaabaa in mishiinka uu dhaawacmo ama uu keeno shil.
2.2 Ha u isticmaalin mishiinka meel ay ka iman karto khatar qarax
2.3Mashiinka waa in uu ku shaqeeyaa dad mas'uul ah, aqoon iyo tababaran.
2.4Mashiinka waa in lagu qalaa meel qalalan. Tallaabooyinka ilaalinta waa in la qaataa marka loo isticmaalo roobka ama dhulka qoyan.
2.5 Awood gelinta waxay ku dhex jirtaa 380V± 10%, 50 Hz. Haddii laynka gelinta la fidiyey la isticmaalo, xariiqdu waa inay lahaataa qayb ku filan rasaasta.
2.6 Ku buuxi saliidda hadhka (N46 ISO3448) haanta ka hor inta aanad isticmaalin. Mugga saliiddu waa inuu ahaadaa qiyaastii 2/3 ee haanta.
Badbaadada
Calaamadaha soo socda ayaa lagu dhejiyaa mashiinka.
| Digniin, khatar! Fadlan ka digtoonow marka aad shaqeyso ama u dhowdahay aagga calaamadan leh! |  |
| Khatar, shoog koronto! Qaybaha calaamadan leh waxay yeelan karaan khatar koronto oo soo daata. Ka taxdar markaad halkan ka shaqaynayso. |  |
| Digniin, dhaawac gacanta |  |
3.2. Ka taxadarida Badbaadada
Marka mishiinka la shaqaynayo, tilmaamaha iyo xeerarka badbaadada waa in si taxadar leh loo dhawraa.
3.2.1 Hawlwadeenku waa inuu noqdaa mid tababaran oo xirfad leh.
3.2.2 Si buuxda u baadh oo u ilaali mishiinka sanadkiiba si aad u hesho badbaadada iyo isku halaynta mashiinka.
3.2.3 Awood: sanduuqa qaybinta korontadu waa inuu lahaadaa cilad dhulka oo leh heerka badbaadada korantada.
Dhul-dhigid: Goobta oo dhan waa in ay wadaagtaa silig isku mid ah, nidaamka isku xirka dhulkana waa in la dhammeeyaa oo ay tijaabiyaan dad xirfad leh.
3.2.4 Kaydinta mishiinka:
Khatarta minka ah dhammaan qalabka waa in loo shaqeeyaa sida soo socota:
※ Ha taaban qaybaha electrophorus
※ Mamnuuc in xadhiga laga jaro si loo gooyo
※ Ha saarin shay culus ama fiiqan fiilooyinka, oo xakamee heerkulka fiilada gudaha heerkulka xaddidan (70℃)
※ Ha ka shaqayn deegaanka qoyan. Hubi haddii jeexdin iyo kabaha ay engegan yihiin.
※ Ha daadin mishiinka
3.2.5 Hubi xaaladda dahaarka ee mishiinka wakhti mar
※ Hubi dahaarka fiilooyinka gaar ahaan dhibcaha la soo saaray
※ Ha ku shaqayn mashiinka xaalad aad u daran.
※ Hubi in cilada dhulka ay si fiican u shaqeyso ugu yaraan bishii.
※ Hubi dhul-goynta mishiinka shaqaale aqoon u leh
3.2.6 Si taxadar leh u nadiifi mashiinka
※ Ha u isticmaalin walxaha wax u dhimaya dahaarka si sahal ah (sida gaaska, xabagta, iyo dareerayaasha kale)
※ Korontadu waa in la gooyaa marka shaqada la dhammeeyo.
Haddii kor lagu soo sheegay kaliya, taxaddarku si fiican ayuu u shaqayn karaa.
3.2.7JOOJINTA DEGDEGGA AH
Xaalad kasta oo lama filaan ah ayaa dhacda, fadlan taabo "joojin degdeg ah" isla markiiba si aad u joojiso mishiinka. Kadib xalinta mashaakilaadka u rog JOOJINTA DEGDEGGA AH dhanka saacada si aad mar labaad mishiinka u bilowdo.
3.2.8 Adkeynta qaybaha:Hubi in tuubooyinka si sax ah oo adag loo hagaajiyay. Hubi in aanay hoos ugu soo degi karin hawlwadeenka dhaawaca
3.2.9 Shaqaalahabadbaadada markaad shaqaynayso
Ka saar dahabka iyo faraantiyada, hana xidhin dharka dabacsan iska ilaali xidhashada shaadhka kabaha, shaarbaha dheer ama timaha dhaadheer ee laga yaabo in lagu xidho mishiinka.
3.2.10Goobta nadiifi oo nadiif ahy
Goobta dadku ku badan yihiin, wasakhda iyo wasakhda leh maaha kuwo ku habboon in la shaqeeyo, sidaas darteed waa muhiim in goobta laga dhigo nadiif iyo nadiif.
3.2.11 Qofka aan tababbaran waligiis waa in loo ogolaado inuu ku shaqeeyo mishiinka wakhti kasta.
3.3 Khatarta ka iman karta
3.3.1 Band arkay
Mashiinkan waxa kaliya oo ku shaqeeya qof xirfad leh ama shaqaale tababaran, haddii kale shil aan loo baahnayn ayaa laga yaabaa inuu keeno.
3.3.2 Saw Blade
Weligaa ha taaban miinshaar ordaysa, ama dhaawac ayaa keeni kara
3.3.3 Goynta
Kahor intaanad jarin, nadiifi ciidda ka baxsan tuubooyinka ama darafyada kale ee ku dhex jira tuubooyinka marka la qaadayo. Tani waxay ka fogaan kartaa waxyeelada aan loo baahnayn ee daabka miinshaarka ama shilalka kale
Qiyaasta Farsamo ee lagu dabaqi karo
| Nooca | TPWC-315 |
| Qalabka lagu gooyo | PE, PP, PVDF |
| Max. Awood goynta | 315mm |
| xagal goynta | 0°～67.5° |
| Xagasha oo aan sax ahayn | ≤1° |
| Xawaaraha khadka ee daab miinshaar | 230 m/daqiiqo |
| heerkulka deegaanka | -5～45℃ |
| Korontada | 380 V± 10 % |
| Soo noqnoqda | 50 Hz |
| Wadarta hadda | 5A |
| Awoodda guud | 3.7 KW |
| Matoorka Wadista | 2.2 KW |
| Matoorka unugga Haydarooliga | 1.5 KW |
| Iska caabin dahaarka | >1MΩ |
| Max. cadaadiska hydraulic | 6 MPa |
| Wadarta miisaanka (kg) | 1100 |
Sharaxaada
Miishaarka band waxaa loo isticmaali karaa in la gooyo tuubooyinka PE sida xagal go'an marka la samaynayo suxulka, tee iyo cross, si mishiinka u leeyahay sifooyinka hufnaan shaqo sare iyo heerka isticmaalka ee alaabta.
5.1 Sharaxaada qaybaha
| 1. qalabka digniinta | 2. giraangiraha xiisadda | 3.miisaanka xagal | 4. sanduuqa xakamaynta |
| 5. hagaajinta heerka | 6. 67.5° kursi | 7. qalab hagaajin | 8.sanduuqa miinshaar |
5.2 Guddi hawleedka
| 1. Voltmeter | 2. Tusiyaha Xawaaraha Khadka | 3. tilmaame koronto | 4. Tilmaamaha socda |
| 5. U soco saacadda | 6. Kac | 7. Buzzer | 8. Joogsiga digniinta |
| 9. Joogsi degdeg ah | 10.Habiyaha xawaaraha Feed | 11. Dib u habeyn | 12. Si tartiib ah u dhac |
| 13. Dhaqso u dhaca | 14. u orda dhanka saacada kahor | 15. Beddelka miinshaarta | 16. Tilmaamaha shaqada ee bamka saliidda |
Rakibaadda
6.1 Qaadista iyo rakibidda
6.1.1 Haddii forklift la isticmaalo marka la rakibayo, si taxadar leh uga geli fargeetada gunta hoose ee mashiinka si aad uga fogaato waxyeellada tuubada saliidda ama wareegga.
6.1.2 Marka la dhigayo mishiinka, mishiinku waa inuu ahaado mid xasiloon oo heer ah iyadoo la hagaajinayo heerka hagaajinta
6.1.3 Mashiinkan caadiga ah wuxuu jari karaa xagal 0 ~ 67.5 °, haddii xagal 45 ° loo baahan yahay, kursiga 67.5 ° waa in la saaraa ka hor inta aan la shaqayn.
Hawlgalka
7.1 Bilaabida
7.1.1 Awoodda mishiinka, tilmaamuhuna waa inuu shidnaa (haddii aanu shidnayn, xidhiidhku waa khaldan yahay).
7.2 Tijaabinta sanduuqa miinshaarta ee kor iyo hoos u socda adiga oo u rogaya hagaajinta xawaaraha quudinta dhinaca midig ee guddiga hawlgalka.
7.3 Taabo batoonka "jog-saacda u jihada" iyo "ku ordi saacadda kahor"si aad u hubiso jihada ay u socoto miinshaarka. Haddii ay u wareegto jihada khaldan, is waydaarsiga xidhiidhka ka dhexeeya labada fiilood ee nool ee ku xidhan sahayda korontada.
7.4Hawlgalka goynta
7.4.1 Dabci furka qufulka xagasha, ku riix sanduuqa miinshaarka gacmaha xagasha loo baahan yahay (sida xagal loo baahan yahay), oo ku xidh furaha qufulka xagasha.
7.4.2 Kor u qaad sanduuqa daabka miinshaar dhererka (oo lagu go'aamiyay dhexroorka tuubada in la gooyo) si loo hubiyo in iliga miinshadu uu ka sarreeyo tuubooyinka.
7.4.3 Tuubooyinka goynta dul saar miiska shaqada, hagaaji booska goynta, oo ku hagaaji tuubada suunka naylon adoo isticmaalaya qalab quful.
7.4.4 Bilow daab miinshaar, marka daabka miishaarku gaadho xawaare cayiman (Tilmaanta orodka ayaa iftiimin doonta), u rog hagaajinta xawaaraha quudinta si uu si tartiib ah ugu dhaco sanduuqa miinshaar. Xawaaraha dhicista waa in loo habeeyaa iyadoo loo eegayo dhexroorka tuubada iyo dhumucda.
7.4.5 Marka goynta la dhammeeyo, fadlan hoos u qabo tuubada hoos u dhig si aad uga fogaato xannibaadda daabka miinshaarka.
7.4.6 Riix badhanka xaaladaha degdegga ah haddii wax aan caadi ahayn ay dhacaan inta lagu jiro goynta. Kadib xalinta mashaakilaadka u rog JOOJINTA DEGDEGGA ah saacada jihada si aad mar labaad mishiinka u bilowdo.
7.4.7 Daabka miinshaar si toos ah ayuu u istaagi doonaa marka uu gaaro booska xaddidan ee hoose
7.4. 8 Markaad dhammaynayso goynta ka saar tuubada gooyay oo dib u jar.
7.4. 9 Mashiinka caadiga ah wuxuu gooyn karaa xagal 0 ~ 67.5 °, haddii xagal 45 ° loo baahan yahay, kursiga 67.5 ° waa in la saaraa ka hor inta aan la shaqayn tuubooyinka, oo lagu muujiyay sida soo socota:
Digniin:
1) Ku soo celi mishiinka 30 daqiiqo ka dib markaad ka jarto tamarta si aad u ilaaliso beddelaha.
2) Mashiinka oo dhan waa in la dhoobo si loo xaqiijiyo badbaadada
3) Hubinta iyo dayactirka qaybaha korontada waa in uu sameeyaa qof xirfad leh
Khaladaadka Iyo Xalka
Fadlan isticmaal qalabyada ku lifaaqan, qaybaha dheeriga ah ama aaladaha kale ee wata shahaado badbaado intaad ilaalinayso ama beddesho qaybaha. Aaladaha iyo agabka dheeriga ah ee aan haysan shahaadada badbaadada waa mamnuuc in la isticmaalo.
Shaxda.1 Mechanical failure
| Shayga | Sharaxaada | Falanqaynta | Xalka |
| 1 | daab miinshaar waa la camiray | 1. Xagasha kursiga wareega ayaan si adag loo xidhin. 2. Mishaarka miinshaar si adag looma adkeeyo. 3. Miishaarku si tartiib tartiib ah ayey u ordaan ama daabkii miinshaarku si degdeg ah u dhaco | 1. Ku xidh qalabka qufulka xagasha. 2. Ku hagaaji rullaluistemadka xiisadda si aad u kiciso daabka miinshaarka. 3. Hoos u dhig xawaaraha hoos u dhacaya oo hagaaji xawaaraha xariiqda miinshaarta. |
| 2 | daab miinshaar dhibciyo | 1. Qalabka miinshaarka si fiican looma hagaajin. 2. Baan miinshaar aan kacsanayn. 3. giraangiraha daabka miinshaar waa la debcay. 4. Xudunta udub-dhexaadka waalka qulqulaya ayaa xannibmay | 1. Hagaji xajinta miinshaarta si aad u hagaajisid daabka miinshaarka booska ugu fiican. 2. Ku hagaaji rullaluhu kacsanaanta iyo xiisadda daabka miinshaarrada. 3. Si adag ugu xidh shaagagga miinshaarka. 4. nadiifi xudunta udubdhexaadka qulqulka |
Shaxda.2 Qaladaadka habka Hydraulic
| Shayga | Sharaxaada | Sababaha | Xalka |
| 1 | Matoorka bamka saliida ma shaqeeyo | 1. Xiriiriyaha ma xidhna 2. Khadadka gudaha ayaa go'an 3. Matoorku waa khalad. | 1. Hubi xiriiriyaha; 2. Hubi xidhiidhka ama furka. 3. Eeg oo dayactir matoorka. |
| 2 | Cadaadis kuma jiro nidaamka, iyo qaylada dheer ee bamka | 1. Jihada wareega ee mishiinka bamka saliida sax maaha; 2. Isku-xidhaha matoorka iyo bamka saliidda ayaa go'an 3. Saliid kuma filna ama aad u wasakh badan. | 1. Waa in ay u rogmato dhanka saacada; 2. Hubi lammaanaha; 3. Buuxi ama beddel saliidda; |
| 3 | Xawaaraha qaadista dhululubada weyn waa mid aad u degdeg badan ama aad u gaabis ah | 1. Cadaadiska nidaamka oo aad u sarreeya ama hooseeya; 2. Qulqulka ceejinta si khaldan ayaa loo hagaajiyaa; 3. Waalka dhabanka la xakameyn karo ayaa loo hagaajiyaa si khaldan. | 1. Hagaajin cadaadiska nidaamka; 2. Hagaajin tuubada ceejinta; 3. Hagaajin halbeegga jihada. |
| 4 | Cadaadiska looma hagaajin karo sare ama cadaadiska cadaadiska ayaa aad u weyn | 1. Xudunta udub-dhexaadka waalka-dhaafka ah ayaa xannibmay 2. Saliidda saliidda waa la xannibay. 3. Xuddunta waalka xad dhaafka ah ayaa xanniban | 1. Ka saar oo dhaq ama beddel waalka qulqulaya 2. Maydh filtarka saliidda. 3 . Kala furfur oo nadiifi xudunta udub dhexaadka ah ee waalka. |
Jaantuska Unugga Wareegga & Haydarooliga
9.1 jaantuska cutubka wareegga (Tixraaca lifaaqa)
9.2 jaantuska cutubka Haydarooliga (Tixraaca lifaaqa)
