TPWC630 MULTI ANGLE BAND SAW

Nkọwa dị mkpirikpi:

Polyethylene Pipe Multi Angle Band Saw nkọwa 1.A na-eji ngwaahịa a na mmepụta ogbako nke elbow, tee, nke na-ebelata ihe mkpofu ihe ma melite arụmọrụ ịgbado ọkụ. 2.Cutting angle range 0-67.5º, kpọmkwem n'akuku ọnọdụ. 3.N'ihi na PE, PP na ihe ndị ọzọ thermoplastic nke a na-emepụta site na mgbidi mgbidi siri ike, a pụkwara iji ọkpọkọ mgbidi na-emepụta ihe na-emepụta ihe na-emepụta ihe ndị ọzọ na-abụghị ígwè, ihe akụkụ. 4.Integration nke structural imewe, na hụrụ ahụ, na rotary table imewe bụ nnọọ ike 5.Good kwụsie ike, ala mkpọtụ, mfe iji rụọ ọrụ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

1	Aha ngwa na ihe nlereanya	TPWC630 Multi Angle Band hụrụ
2	Ịcha dayameta tube	≤630mm
3	Ịcha akụkụ	0～67.5°
4	Njehie akụkụ	≤1°
5	Ịcha ọsọ	0～250m/min
6	Ịbelata ọnụego nri	Enwere ike idozi
7	Ike arụ ọrụ	～380VAC 3P+N+PE 50HZ
8	Ịkwọ ụgbọala ike	2.2KW
9	Ike ọdụ ụgbọ mmiri hydraulic	1.5KW
10	Mkpokọta ike	3.7KW
11	Mkpokọta ibu	1900KG

Ngwa na atụmatụ

* A na-etinye ya na ọkpọkọ siri ike ma ọ bụ ọkpọkọ mgbidi ahaziri nke ejiri thermoplastic dị ka PE na PP, yana ọkpọkọ na akwa ndị ọzọ nke ihe na-abụghị ígwè.

*Nnyocha onwe na nkwụsị nke igwe ma ọ bụrụ na agụba nkwụsịtụ na-enyere aka ịkwado ndị ọrụ nchekwa

* Ngwakọta pụrụ iche nke ahụ na tebụl swivel na-eme ka ha kwụsie ike

Jiri ntuziaka nke ịkpụ Band hụrụ

1.With kwesịrị ekwesị ogo tightness nke saw agụba, ọsọ na ndepụta ego ga-kwesịrị ekwesị.

2.Mgbe ị na-eme Iron, ọla kọpa, ngwaahịa aluminom, a machibidoro ịcha mmiri mmiri.

3. Ọ bụrụ na agụba agbajikwa, mgbe dochie ọhụrụ agụba, workpiece ga-atụgharị na reinstalled.

Ọrụ anyị

1. Akwụkwọ ikike otu afọ, nlekọta ogologo ndụ.

2. N'oge akwụkwọ ikike, ọ bụrụ na ihe na-abụghị akụkọ ihe mere eme mebiri emebi nwere ike were mgbanwe ochie ọhụrụ n'efu. N'oge akwụkwọ ikike, anyị nwere ike ịnye ọrụ mmezi (ụgwọ maka ọnụ ahịa ihe).

3. Ndị injinia dị maka igwe ọrụ na mba ofesi mana ụgwọ niile onye zụrụ ya ga-akwụ.